REMOVING PUSH
ROD FROM OLD BOOSTER:
1. Hold push rod in vise using caution to not damage threads
on rod if applicable. Support weight of booster at all times
during this operation.
2. Using a soft faced hammer,
strike rear shell near base of hub with a forceful blow while
pulling unit away from vise. Use caution not to damage hub.
INSTALLING PUSH ROD IN REPLACEMENT
UNIT:
1. Insert new plastic lock (furnished) into groove of push rod
and push into hub.
2. Push and move rod side
to side until lock catches in place. Do not use hammer to force
rod down. |